initial commit esphome

esphome/og-fl-us-room.yaml

@@ -0,0 +1,184 @@
+substitutions:
+  devicename: og-fl-us-room
+
+esphome:
+  name: ${devicename}
+  platform: ESP8266
+  board: nodemcuv2
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  password: "7e132689c324a0f7de57d556a0e18e72"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  manual_ip:
+    static_ip: 192.168.1.94
+    gateway: 192.168.1.1
+    subnet: 255.255.255.0
+    
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${devicename}"
+    password: "RL24sDzw4lL6"
+
+captive_portal:
+
+### temp sensor
+### switch für releae von garage
+### audio connector auch switch???
+
+    
+# Example configuration entry
+light:
+  - platform: neopixelbus
+    id: neopixel
+    name: "NeoPixel Light"
+    type: RGB
+    variant: WS2812
+    pin: RX
+    num_leds: 12
+    internal: true
+
+  - platform: partition
+    name: "Status LED 01"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 0
+        to: 0
+
+  - platform: partition
+    name: "Status LED 02"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 1
+        to: 1
+
+  - platform: partition
+    name: "Status LED 03"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 2
+        to: 2
+
+  - platform: partition
+    name: "Status LED 04"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 3
+        to: 3
+
+  - platform: partition
+    name: "Status LED 05"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 4
+        to: 4
+
+  - platform: partition
+    name: "Status LED 06"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 5
+        to: 5
+
+  - platform: partition
+    name: "Status LED 07"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 6
+        to: 6
+
+  - platform: partition
+    name: "Status LED 08"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 7
+        to: 7
+
+  - platform: partition
+    name: "Status LED 09"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 8
+        to: 8
+
+  - platform: partition
+    name: "Status LED 10"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 9
+        to: 9
+
+  - platform: partition
+    name: "Status LED 11"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 10
+        to: 10
+
+  - platform: partition
+    name: "Status LED 12"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 11
+        to: 11
+
+binary_sensor:
+#D2 ist der Soundchip für die Türklingel
+  - platform: gpio
+    pin: D2
+    name: "Haustür Klingel"
+    device_class: sound
+    filters:
+      - delayed_off: 5s
+
+switch:
+#D1 Relais für den Türöffner
+  - platform: gpio
+    pin: D1
+    id: relay
+    name: "Haustür Türdrücker"
+    icon: "mdi:door"
+    on_turn_on:
+    - delay: 3000ms
+    - switch.turn_off: relay
+  - platform: restart
+    name: "${devicename} Neustart"
+
+# D3 Temp Sensor DS18b20
+# Temp_Flur
+dallas:
+  - pin: D3
+  
+sensor:
+  - platform: dallas
+    address: 0xDB0316A35722FF28
+    name: "${devicename} Temperature"
+
+  - platform: wifi_signal
+    name: "${devicename} Wi-Fi Signal"
+    update_interval: 60s
+
+  - platform: uptime
+    name: "${devicename} Uptime"
+    update_interval: 60s