initial commit esphome

esphome/og-wz-us-room.yaml

@@ -0,0 +1,163 @@
+substitutions:
+  devicename: og-wz-us-room
+
+esphome:
+  name: ${devicename}
+  platform: ESP8266
+  board: nodemcuv2
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+#  encryption:
+#    key: "/4G+RLEH9pq9vc3lCO1RDXK8DmM4PyGuS0Hf7+jdobs="
+
+ota:
+  password: "9238a989206f8f05e5dfe8b741eb0005"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  manual_ip:
+    static_ip: 192.168.1.100
+    gateway: 192.168.1.1
+    subnet: 255.255.255.0
+    
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${devicename}"
+    password: "DSFKr3I1aBXy"
+
+captive_portal:
+
+    
+# Example configuration entry
+light:
+  - platform: neopixelbus
+    id: neopixel
+    name: "NeoPixel Light"
+    type: RGB
+    variant: WS2812
+    pin: RX
+    num_leds: 12
+    internal: true
+
+  - platform: partition
+    name: "Status LED 01"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 0
+        to: 0
+
+  - platform: partition
+    name: "Status LED 02"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 1
+        to: 1
+
+  - platform: partition
+    name: "Status LED 03"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 2
+        to: 2
+
+  - platform: partition
+    name: "Status LED 04"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 3
+        to: 3
+
+  - platform: partition
+    name: "Status LED 05"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 4
+        to: 4
+
+  - platform: partition
+    name: "Status LED 06"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 5
+        to: 5
+
+  - platform: partition
+    name: "Status LED 07"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 6
+        to: 6
+
+  - platform: partition
+    name: "Status LED 08"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 7
+        to: 7
+
+  - platform: partition
+    name: "Status LED 09"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 8
+        to: 8
+
+  - platform: partition
+    name: "Status LED 10"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 9
+        to: 9
+
+  - platform: partition
+    name: "Status LED 11"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 10
+        to: 10
+
+  - platform: partition
+    name: "Status LED 12"
+    segments:
+      # Use first 10 LEDs from the light with ID light1
+      - id: neopixel
+        from: 11
+        to: 11
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: D3
+      mode: INPUT_PULLUP
+    name: "${devicename} Radar Sensor"
+    device_class: motion
+    
+switch:
+  - platform: restart
+    name: "${devicename} Neustart"
+
+sensor:
+  - platform: wifi_signal
+    name: "${devicename} Wi-Fi Signal"
+    update_interval: 60s
+
+  - platform: uptime
+    name: "${devicename} Uptime"
+    update_interval: 60s