substitutions:
  devicename: og-wz-us-room

esphome:
  name: ${devicename}
  platform: ESP8266
  board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:
#  encryption:
#    key: "/4G+RLEH9pq9vc3lCO1RDXK8DmM4PyGuS0Hf7+jdobs="

ota:
  password: "9238a989206f8f05e5dfe8b741eb0005"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  manual_ip:
    static_ip: 192.168.1.100
    gateway: 192.168.1.1
    subnet: 255.255.255.0
    
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename}"
    password: "DSFKr3I1aBXy"

captive_portal:

    
# Example configuration entry
light:
  - platform: neopixelbus
    id: neopixel
    name: "NeoPixel Light"
    type: RGB
    variant: WS2812
    pin: RX
    num_leds: 12
    internal: true

  - platform: partition
    name: "Status LED 01"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 0
        to: 0

  - platform: partition
    name: "Status LED 02"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 1
        to: 1

  - platform: partition
    name: "Status LED 03"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 2
        to: 2

  - platform: partition
    name: "Status LED 04"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 3
        to: 3

  - platform: partition
    name: "Status LED 05"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 4
        to: 4

  - platform: partition
    name: "Status LED 06"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 5
        to: 5

  - platform: partition
    name: "Status LED 07"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 6
        to: 6

  - platform: partition
    name: "Status LED 08"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 7
        to: 7

  - platform: partition
    name: "Status LED 09"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 8
        to: 8

  - platform: partition
    name: "Status LED 10"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 9
        to: 9

  - platform: partition
    name: "Status LED 11"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 10
        to: 10

  - platform: partition
    name: "Status LED 12"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 11
        to: 11

binary_sensor:
  - platform: gpio
    pin:
      number: D3
      mode: INPUT_PULLUP
    name: "${devicename} Radar Sensor"
    device_class: motion
    
switch:
  - platform: restart
    name: "${devicename} Neustart"

sensor:
  - platform: wifi_signal
    name: "${devicename} Wi-Fi Signal"
    update_interval: 60s

  - platform: uptime
    name: "${devicename} Uptime"
    update_interval: 60s