substitutions:
  devicename: og-bz-us-room

esphome:
  name: ${devicename}
  platform: ESP8266
  board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:
#  encryption:
#    key: "ASBh/0rFjqcMw312xRW3GBe7YwkJ5N03Sa00THKWFyA="

ota:
  password: "e997f9bb54cc19ba96870868471dd560"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  manual_ip:
    static_ip: 192.168.1.98
    gateway: 192.168.1.1
    subnet: 255.255.255.0
    
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename}"
    password: "NWODEbSPSLkM"

captive_portal:

wled:

e131:
  method: multicast # default: register E1.31 to Multicast group

# Example configuration entry
light:
  - platform: neopixelbus
    id: neopixel
    name: "NeoPixel Light"
    type: GRB
    variant: WS2812
    pin: RX
    num_leds: 40
    internal: true

  - platform: partition
    name: "Status RS"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 0
        to: 0

  - platform: partition
    name: "Status LED 01"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 1
        to: 1

  - platform: partition
    name: "Status LED 02"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 2
        to: 2

  - platform: partition
    name: "Status LED 03"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 3
        to: 3

  - platform: partition
    name: "Status LED 04"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 4
        to: 4

  - platform: partition
    name: "Status LED 05"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 5
        to: 5

  - platform: partition
    name: "Status LED 06"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 6
        to: 6

  - platform: partition
    name: "Status LED 07"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 7
        to: 7

  - platform: partition
    name: "Status LED 08"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 8
        to: 8

  - platform: partition
    name: "Status LED 09"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 9
        to: 9

  - platform: partition
    name: "Status LED 10"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 10
        to: 10

  - platform: partition
    name: "Status LED 11"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 11
        to: 11

  - platform: partition
    name: "Status LED 12"
    segments:
      # Use first 10 LEDs from the light with ID light1
      - id: neopixel
        from: 12
        to: 12

  - platform: partition
    name: "Night Light"
    segments:
      # Use LEDs 11-20 from the light with ID light1
      - id: neopixel
        from: 13
        to: 26
    effects:
      - wled:
          port: 19446
      - e131:
          universe: 1
          channels: RGB
          
  - platform: partition
    name: "Msg Light"
    segments:
      # Use LEDs 11-20 from the light with ID light1
      - id: neopixel
        from: 28
        to: 39

          
  - platform: partition
    name: "Status BM"
    segments:
      # Use LEDs 11-20 from the light with ID light1
      - id: neopixel
        from: 27
        to: 27

binary_sensor:
  - platform: gpio
    pin:
      number: D3
      mode: INPUT_PULLUP
    name: "${devicename} Radar Sensor"
    device_class: motion

switch:
  - platform: restart
    name: "${devicename} Neustart"

sensor:
  - platform: wifi_signal
    name: "${devicename} Wi-Fi Signal"
    update_interval: 60s

  - platform: uptime
    name: "${devicename} Uptime"
    update_interval: 60s